负载均衡（Load Balance）的意思是指将负载（工作任务）进行平衡、分摊到多个操作单元上进行运行，例如FTP服务器、Web服务器、企业核心应用服务器和其它主要任务服务器等，从而协同完成工作任务。如果存在更多的数据包同时通过网络连向一台服务器， 也就是网络的速度比网络所连接的设备速度快的情况下，负载均衡技术是解决这个问题的有效方式。负载均衡是一种扩展现有网络设备和服务器的带宽、增加吞吐量、加强网络数据处理能力、提高网络的灵活性和可用性的技术。
在此拓扑结构中，h1是客户端，服务器端h2，h3，h4上各自有不同的服务。我们要实现一个负载均衡的北向程序，当h2，h1，h3向h1传输数据时，北向应用根据链路的使用状况动态的调整路由规则。例如：s1-s4链路带宽充足情况下应默认s4-s1的传输路径，当剩余带宽不足的情况下应动态调整路由，使链路负载达到平衡。
https://www.cnblogs.com/gs-23/p/12156503.html
MyTopo.py，运行：sudo mn --custom MyTopo.py --topo mytopo --controller remote -x --switch ovsk,protocols=OpenFlow13
from mininet.topo import Topo
class MyTopo( Topo ):
def __init__( self ):
# initilaize topology
Topo.__init__( self )
# add hosts and switches
host1 = self.addHost( 'h1' )
host2 = self.addHost( 'h2' )
host3 = self.addHost( 'h3' )
host4 = self.addHost( 'h4' )
switch1 = self.addSwitch( 's1' )
switch2 = self.addSwitch( 's2' )
switch3 = self.addSwitch( 's3' )
switch4 = self.addSwitch( 's4' )
# add links
self.addLink(host1,switch1)
self.addLink(switch1,switch2)
self.addLink(switch1,switch3)
self.addLink(switch1,switch4)
self.addLink(switch2,switch4)
self.addLink(switch3,switch4)
self.addLink(switch4,host2)
self.addLink(switch4,host3)
self.addLink(switch4,host4)
topos = { 'mytopo': ( lambda: MyTopo() ) }controller.py
# encoding: utf-8
import httplib2
import time
import json
class OdlUtil:
url = ''
def __init__(self, host, port):
self.url = 'http://' + host + ':' + str(port)
def install_flow(self, container_name='default',username="admin", password="admin"):
http = httplib2.Http()
http.add_credentials(username, password)
headers = {'Accept': 'application/json'}
flow_name = 'flow_' + str(int(time.time()*1000))
#s2流表
#h2工作时s2端口1流量空闲时下发的流表
h2_to_s2_1 ='{"flow": [{"id": "0","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.2/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
#h3工作时s2端口1流量空闲时下发的流表
h3_to_s2_1 ='{"flow": [{"id": "1","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
mh3_to_s2_1 ='{"flow": [{"id": "1","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "100","cookie": "1","table_id": "0"}]}'
#h3工作时s2端口1流量满载时下发的流表
h3_to_s2_2 ='{"flow": [{"id": "2","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "2"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
mh3_to_s2_2 ='{"flow": [{"id": "2","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "2"},"order": "0"}]}}]},'\
'"priority": "100","cookie": "1","table_id": "0"}]}'
#s3流表
s3_1='{"flow": [{"id": "0","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
s3_2='{"flow": [{"id": "1","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.1/32","ipv4-destination": "10.0.0.3/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "2"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "2","table_id": "0"}]}'
#s1流表
s1_2To1='{"flow": [{"id": "0","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.2/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
s1_3To1='{"flow": [{"id": "1","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.3/32","ipv4-destination": "10.0.0.1/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "1"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "1","table_id": "0"}]}'
#h1工作时s1端口2流量空闲时下发的流表
h1_to_s1_2 ='{"flow": [{"id": "2","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.1/32","ipv4-destination": "10.0.0.3/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "2"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "2","table_id": "0"}]}'
mh1_to_s1_2 ='{"flow": [{"id": "3","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.1/32","ipv4-destination": "10.0.0.3/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "2"},"order": "0"}]}}]},'\
'"priority": "100","cookie": "3","table_id": "0"}]}'
#h1工作时s1端口2流量满载时下发的流表
h1_to_s1_3 ='{"flow": [{"id": "2","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.1/32","ipv4-destination": "10.0.0.3/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "3"},"order": "0"}]}}]},'\
'"priority": "101","cookie": "2","table_id": "0"}]}'
mh1_to_s1_3 ='{"flow": [{"id": "3","match": {"ethernet-match":'\
'{"ethernet-type": {"type": "2048"}},'\
'"ipv4-source":"10.0.0.1/32","ipv4-destination": "10.0.0.3/32"},'\
'"instructions": {"instruction": [{"order": "0",'\
'"apply-actions": {"action": [{"output-action": {'\
'"output-node-connector": "3"},"order": "0"}]}}]},'\
'"priority": "100","cookie": "3","table_id": "0"}]}'
headers = {'Content-type': 'application/json'}
num=0
#下发流表，地址由ODL上获得
#下发s1与s3的流表
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/0', body=s1_2To1, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1', body=s1_3To1, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:3/flow-node-inventory:table/0/flow/0', body=s3_1, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:3/flow-node-inventory:table/0/flow/0', body=s3_2, method='PUT',headers=headers)
#s2调用h2到1的流表
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:2/flow-node-inventory:table/0/flow/0', body=h2_to_s2_1, method='PUT',headers=headers)
while num < 4 :
s1_uri = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/node-connector/openflow:1:2'
s2_uri = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:2/node-connector/openflow:2:1'
#获取s1端口2的流量
response, content = http.request(uri=s1_uri, method='GET')
content = json.loads(content.decode())
statistics = content['node-connector'][0]['opendaylight-port-statistics:flow-capable-node-connector-statistics']
s1_bytes1 = statistics['bytes']['transmitted']
#0.5秒后再次获取
time.sleep(0.5)
response, content = http.request(uri=s1_uri, method='GET')
content = json.loads(content.decode())
statistics = content['node-connector'][0]['opendaylight-port-statistics:flow-capable-node-connector-statistics']
s1_bytes2 = statistics['bytes']['transmitted']
s1_speed=float(s1_bytes2-s1_bytes1)/0.5
if s1_speed !=0 :#获取有效的速度
print ('s1端口2速度：')
print (s1_speed)
#在检测到s1端口2流量空闲时发的流表
if s1_speed < 1000 :
print(' s1端口2空闲，h1数据包改为往s1端口2通过')
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/2', body=h1_to_s1_2, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/3', body=mh1_to_s1_2, method='PUT',headers=headers)
#在检测到s1端口2流量满载时发的流表
else :
print(' s1端口2满载，h1数据包改为往s1端口3通过')
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/2', body=h1_to_s1_3, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/3', body=mh1_to_s1_3, method='PUT',headers=headers)
#获取s2端口1的流量
response, content = http.request(uri=s2_uri, method='GET')
content = json.loads(content.decode())
statistics = content['node-connector'][0]['opendaylight-port-statistics:flow-capable-node-connector-statistics']
s2_bytes1 = statistics['bytes']['transmitted']
#0.5秒后再次获取
time.sleep(0.5)
response, content = http.request(uri=s2_uri, method='GET')
content = json.loads(content.decode())
statistics = content['node-connector'][0]['opendaylight-port-statistics:flow-capable-node-connector-statistics']
s2_bytes2 = statistics['bytes']['transmitted']
s2_speed=float(s2_bytes2-s2_bytes1)/0.5
if s2_speed !=0 :#获取有效的速度
print ('s2端口1速度：')
print (s2_speed)
#在检测到s2端口1流量空闲时发的流表
if s2_speed < 1000 :
print(' s2端口1空闲，h3数据包改为往s2端口1通过')
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:2/flow-node-inventory:table/0/flow/1', body=h3_to_s2_1, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:2/flow-node-inventory:table/0/flow/2', body=mh3_to_s2_2, method='PUT',headers=headers)
#在检测到s2端口1流量满载时发的流表
else :
print(' s2端口1满载，h3数据包改为往s2端口2通过')
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:2/flow-node-inventory:table/0/flow/1', body=mh3_to_s2_1, method='PUT',headers=headers)
response, content = http.request(uri='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:2/flow-node-inventory:table/0/flow/2', body=h3_to_s2_2, method='PUT',headers=headers)
odl = OdlUtil('127.0.0.1', '8181')
odl.install_flow()
sudo ovs-ofctl -O OpenFlow13 dump-flows s1
查看交换机流表命令：在termail中执行，与执行新建mininet一样。